The reason behind Netgear a6120 not detected issue might happen due to faulty or outdated equipment or a problem with the discontinuous power supply. Moreover, wrong channel settings or outdated drivers can also be the cause of Netgear a6210 not detected issue. Also, it might occur due to the corrupt drivers or your firewall security causing the conflict with the Netgear WiFi router.
Most users of the Netgear wireless router have experienced this annoying issues on their new models of Netgear router frequently.
In addition, the users of Netgear WiFi router proclaim that whenever they turn on their system, the wireless adapter of their wireless router runs fine, but after 1-2 minutes, the internet gets cut off abruptly.
As a matter of fact, the last and final approach to enable the WiFi network is to unplug the adapter and reconnect it again after 2-3 minutes.
We do understand that unplugging and reconnecting the adapter can be a tiresome job at times. We do understand that unplugging and reconnecting the adapter can be a tiresome job at times. But it is an important fix to resolve an unstable connection.
Despite the fact, this error of Netgear wireless router can seriously interrupt Netgear router login issues. But , we have some solutions to prevent this troublesome problem.
If you want to get rid of this error then it is advised to follow the effective fixes given in this post. Read on.
Know the reason behind Netgear a6210 not found error
Prior to proceeding further with the possible fixes to eradicate this issue, you will first of all, require to understand the reasons behind this error.
Common reasons include the following:
Outdated or old Netgear router's firmware.
Netgear router not receiving constant WiFi signals from the modem.
An outdated modem might be a reason behind the issue.
Overheating of the Netgear wireless router.
To fix overheating of Netgear wireless router, turn it off till it gets cool.
Now, you know the common reasons behind this issue. You can easily fix on your own.
More effective ways to resolve Netgear a6210 not detected error
Way 1: Verify the Device
First of all, you have to make sure that your Netgear router is working fine. To verify, connect your computer or laptop to the Netgear wireless router and launch an internet browser onto it. Enter routerlogin.net into the address bar field and if you aren't facing any issue while accessing Netgear router setup login page, it means your device is working fine.
Way 2: Power Supply
Make sure that your router is receiving a good amount of power supply. It should be plugged-in properly into a damaged-free electrical outlet.
Way 3: Upgrade the Device
To avoid any type of issue related with your Netgear router, make sure that you update its firmware regularly with the latest version of technology.
Way 4: Check the Firewall
Some applications come with an in-built firewall. As a matter of fact, it might be a bit of problem that causes the Netgear a6210 not detected issue. So, to resolve the issue, turn off the firewall security. Moreover, disable the “Block Internet Connection Sharing” option as well in the “Advanced” tab of those applications.
Way 5: Change the Channel Settings
Hit the “Start” menu.
Go to “Control Panel”.
Navigate to “Network and Sharing Center”.
Click on the “Change adapter settings” option.
Load-up the properties of your Netgear adapter. Right-click on it.
Move to the “Advanced”.
Now, from the drop-down menu, select the 1, 6, or 11 channels.
Way 6: Disable the Universal Serial Bus (USB) Selective Suspend
Go to the battery icon. Right-click on it.
Select the “Power” Options.
Now, go to the “Advanced Power” options after that.
Find the USB settings and in there locate the option “USB selective suspend settings”.
Now, you have to disable it for ”On battery” and ”Plugged In” both.
Save the changes.
Way 7: Disable Universal Serial Bus (USB) Root Hub Power Preserving
Go to the device manager.
Expand the “Universal Serial Bus” (USB) controllers option.
Open the properties.
Go to the “Power management” tab.
At last, you have to uncheck the box that says “your system can turn off your router for power saving”. Save the changes and exit. Restart your computer and see whether the Netgear a6210 not detected issue is resolved or not.
Way 8: Disable WLAN (wireless local area network) Adapter Suspend
Expand the option of “Network Adapters”.
Navigate to the “Power Management” tab.
Now, you have to uncheck the “your system can turn off your WLAN for saving power” box.
Under the “Advanced” tab, disable selective suspend option.
Confirm your changes.
Way 9: Update the Driver
This is known as one of the most effective ways to fix this Netgear router error.
A lot of Netgear WiFi router users have proclaimed that they resolved this error by just updating the driver.
In order to update the driver, follow some easy to execute steps given-below.
First of all, hit the “Start” menu.
Onto to the search field of the Start menu - type “Device Manager” (without quotes).
Click on the “Go” button.
After that, choose “Device Manager” option.
You will now get a list of drivers that are installed on your system.
Next, on the Device Manager page find the ‘Network and Adapter’ option.
Then, expand the option “Network and Adapter”.
As soon as you expand the “Network and Adapter” option, you see the version and name of the Netgear wireless router you are utilizing currently.
Right-click on the “Netgear router” option under the list of options.
Click on the “drop-down” button.
Select the “Update Driver” and the updating process will begin shortly. The process of updating might take sometime to finish.
At last, restart your system. After following all the above-described steps carefully, check whether the issue discussed in this post has resolved or not. If the issue still persists then call our experts at 1-844-897-9854 (toll-free).
© Spalding Laboratories. All Rights Reserved.